Log sawing line MEM - 2009

697-003
Asked price :
Make Offer
 Follow
  • MakeMEM
  • Year 2009
  • Location Bertrix -  BE
End in 8d 7h 12m 19s
  • Start date 16/01/2017 at 5:00 PM
  • End date 31/10/2017 from 6:30 PM
  •  
  • Viewing day
    • BY APPOINTMENT ONLY

  • Removal day

    BY APPOINTMENT ONLY
Payment by bank transfer
  • VAT 21%
  • Seller  BE
  • Fee 0%


Description


Log sawing line
Type: CIRDA
sawing capacity;
wood Length: 2 3.2 m
Diameter: 13 cm fine  end to 40 cm big end
automated entry on multi blades
Composition by station of the line;
mark 100
1; chain to chain transfer, dismantled
Length: 700 cm x 220 cm
Height: 160 cm and 270 cm
2; conveyor, metal detector and rocker
conveyor length: 10 meters
Transport Height: 250 cm

The metal detector is half length of the conveyor belt
Brand: Elmed
Year: 1998
Model: MSG 3100
3; Transfer chain between the rocker and the charger returner toothed cylinders
Landmarks 110-125: Sawmill logs, kind CIRDA, wood of 2.00 m to 3.20 m, diameter of 130 mm end to end 400 mm thick end
roll turner toothed charger for logs up to 3 m
Sharp Chain length basis 9m
Gantry for entrance, type Sharp Chain, wood of 2.00 m to 3.20 m, including spiked pinch, Power and Free
Double shaft 2 axis circular, 4-pin 55 Kw with starters, max opening between blades 600 mm max passage between 400 mm rings, guides motorized rollers 4 H = 600 mm
Hydraulic unit thermostatically controlled to flow control, motor 22 kW, max flow 60 l / min, 220 liter tank, filter back on. (Junior, NEC enslaved ...)
touchscreen kind REVERSE Division 2 with 5 controlled axes + PLC Schneider
15 mw green laser, with holder
Centering straightener 2 arms with roller diameter 80 mm, hinge pin diameter 50 mm, gear synchronization, centering PN Type P100 cylinder and straightening hydraulic cylinder
Gantry for output type Sharp Chain, wood of 1.80 m to 3.20 m, including spiked pinch, Power and Free
exit tunnel COBRA, UPN structure 160 tôlage + 4 mm thick and 10 mm thick shield
simple metal support frame height of 1.50 m to 2.20 m for Cobra or Twin Cirda high surface mounting plate 40 mm thick, feet large section profiles, stiffeners
Platform operator; 4 m²
staircase; height 1.50 m
Cabin 2 mx 2 m; 3 glazed sides with tempered safety glass thickness 7 mm, a sliding door, aluminum joinery
sitting console, U-type ergonomic
Air cabin
Marker 130: Double conveyors, a rubber band, like BC5, lifting, long 2 x 4.00 m
rubber band belt, control head width 500 mm, with tray sheet of 4 mm, drum diameter 220 mm, motor 2,2 Kw
Carpet rubber band width 500 mm; including chassis, tray and tape
Lifting hydraulic cylinder of each conveyor for Each, on 3 levels
Plate of 4 mm thick
This mechanization is intended to convey the slabs to the rubber conveyor belt mark 135, the unedged products to the conveyor 140 and the cores to the mark 200
Marker 135: Rubber conveyor belt type BC12, length 17 m + 1 motorized roller
rubber band belt, head width 1.20 m, with insert sheet of 4 mm, drum diameter 220 mm, motor 2.2 kilowatts
Carpet rubber belt, 1.20 m width including frame + tray + band
Roll diameter 150 mm, width 1.20 m, shaft diameter 35 mm, drive chain 25.4 mm
Plate 4 mm thick
140 landmark: Train motorized rollers + lower lug chain ejector. (Output boards)
Roll diameter 150 mm, width 1.20 m, shaft diameter 35 mm, drive chain 25.4 mm
drive gear motor 2.2 kW, 100 rev / min
Ejector chains cleats T25 type 4-core, length 1.00 m, drive by gear motor brake 2.2 Kw
Wood presence detector for ejection automation
200 landmark: trainde motorized rollers + upper ejector lift chains (core output)
Roll diameter 150 mm, width 1.20 m, axis 35 mm, drive chain 25.4 mm
drive gear motor 2.2 kW, 100 rev / min
Ejector lifting chains type T25, 4-wire, 2 m long, drive shaft diameter 50 mm, drive by gear motor of 2.2 Kw, cylinder by lifting PN, 100 mm stroke
Presence detector wood for automatic ejection
Marker 210: Transfer
Marker 220: Input Table of multi blade, semi automated, with introductions based products 2 and 4 faces
Platform operator, 4 m²
metal stairs, height 1.50m
Roll diameter 150 mm, 600 mm wide, 35 mm axle, drive chain 25.4 mm
drive gear motor 2.2 kW, 100 rev / min
retractable guide plate with motorized rollers, moving on rails round cylinder controlled by PN + adjustable stopper manually by screw / nut system for products referencing 4 faces aligned to the first sleeve of the blade
Arm tackle motorized rollers
alignment mechanization 3 pusher arm, cde PN hinge pin diameter 50 mm, cylinder type P 125
Mechanization 1 pusher arm, cde PN hinge pin diameter 50 mm actuator, PN 80 Type P
Ø 200 mm nylon wheel presser, with welded arm and bearing UCP-type 50 mm hinge pin, lifting by pneumatic cylinder
Schneidert 32 PLC I / O, machine control unit
Wood presence detector, for automatic operation of the introduction of wood cycle
Marker 230 to 250
Edger blades multi MEM
Year Built: 1994
main motor power output: 160 kilowatts
registration number of the machine: 1 RL C.66.4.94
Ejector, lug chain, hydraulic unit, input and output rolls, ejector, sorting output belt, vibratory feeder, waste tape
Dimensions main elements of this position;
Multi edger blades (above the concrete pedestals): 2.60 mx 2.00 mx 2.20 m
exit rollers: 3.30 mx 2.00 mx 2.20 m
output belt: 4.90 mx 2.60 mx 0.96 m
Marker 300: Transfer chain type T25, 4-wire, 5 meters long
Transfer T25, basic control head 2 strands, the geared motor 2.2 KW
Marker 310-330: edger Line
Platform operator, 4 m²
metal staircase
Red laser diode, 15MW, with holder

Stenner edger, Type EDS, AL 8228
Year: 1994
Power: 160 kilowatts

Vibrator 4 m long, 80 cm wide, tray folded sheet thickness 6 mm, hinged 6 with coupling rods rosta, chassis UPN 160, gear motor 5.5 kw eccentric connecting rod OXYC thickness of 80 mm, silent block of damping, transmission, protective cover
simple metal support frame, height of 1.50 m to 2.00 m, for edger Stenner, mounting plates, ...
mark 400
Waste conveyor
This is a conveyor belt which discharges the waste to the crusher
Dimensions: 22.00 +/- 1.40 mx mx 1.05 m
The width of the conveyor belt was 0.40 m
410/420 landmark
vibrating troughs and sieving before the entry of waste in Klöckner mill
Year of manufacture: 1999
Type: KvR 500 x 6.75 M
Dimensions: 6.80 mx 0.65 mx 0.70 m
Additional equipment installed: Elmed metal detector type MGS 2000 (5207 number)
510 landmark: Conveyor waste, PVC tape, type BC 30, 3 m long

List of items

Sale information


Sawmill complete

Direct sale of a sawing line.

Cause: Termination of activities.

List of items   Catalogue

Details of sales

  • Number of items9
  • Location Bertrix -  BE
  • Start date 16/01/2017 5:00 PM CEST
  • End date 31/10/2017 from 6:30 PM  CEST
  •  
  • Viewing day BY APPOINTMENT ONLY
    Rue de Lonnoux 2
    6880 Bertrix -  Belgium
  •  
  • Removal day BY APPOINTMENT ONLY
  •   Rue de Lonnoux 2
    6880 Bertrix -  Belgium
  •  
  • VAT 21%
  • Fee 0%

Sale at the request of a third party. The Terms and Conditions and the Specific conditions apply on all items.

Other equipment
Glass coffee table

Asked price : 20.00 €

8d 7h 12m

Glass coffee table
Pferd Angle Grinder, Drill, Tile cutter

Asked price : 20.00 €

8d 7h 12m

Pferd Angle Grinder, Drill, Tile cutter
Cutting heads and cutting blades

Asked price : 15.00 €

22d 7h 12m

Cutting heads and cutting blades
Carpenter Tools

Asked price : 45.00 €

8d 7h 12m

Carpenter Tools
Festool CTL 22 ESG Vacuum Cleaner

Asked price : 30.00 €

22d 7h 12m

Festool CTL 22 ESG Vacuum Cleaner
Tools

Asked price : 30.00 €

8d 7h 12m

Tools